acid cleaning raw materials, why become the new favorite bathroom cleaning?

in contemporary toilet cleaning, the main face of dirt is urine alkali adhesion on the toilet (the main components are phosphate inorganic, urea and protein organic matter, etc.), calcium and magnesium ions in hard water to form scale, metal device surface rust and surface contamination of dust.

because the urine alkali and scale soluble in acid, so remove these stains, often need acid cleaning agent. The first cleaning formula is to use hydrochloric acid to clean. After all, hydrochloric acid has a good dissolving power to deal with urine scale, and also has a strong bactericidal power. However, it should be noted that too large a concentration of hydrochloric acid will stimulate the skin and eyes. It is recommended to control the concentration of hydrochloric acid when using it.10%below.

the second cleaning formula is the use of acid surface active cleaning. This cleaning agent contains a surfactant detergent and a cooperatively used builder, deodorant, bleach, etc. Commonly used acids are hydrochloric acid, phosphoric acid, citric acid, tartaric acid, acetic acid, formic acid, etc. In order to improve the cleaning effect, bleach and abrasive are sometimes added.

we take a look at a typical acid toilet cleaner formula:

Typical Acid Toilet Cleaner Formulation
composition	Typical Ingredients	content/%
anionic surfactant	LAS,AES	0-3
non-ionic surfactant	AEO	2-20
Cationic Surfactant	quaternary ammonium salt bactericide	0-2
pHvalue regulator	hydrochloric acid, phosphoric acid, oxalic acid, citric acid	0.5-20
electrolyte	nitrate, chloride	0-10
Bleach	persulfur hydrochloric acid, hydrogen peroxide	0-10
Thickener	Polyethylene glycol, carboxymethyl cellulose	0-1
Abrasive	calcium carbonate, silica	0-15
spices and colorants		0.01-0.5
water		margin

also has an acid toilet cleaner formula:

hydrochloric acid9.5 percent, sodium chloride7%, non-ionic surfactant2%, thickener2%-5%,spices0.1 percent, pigment0.0015 percent, add water100 percent.

toilet cleaners

1,increasingly move away from bleach-based toilet cleaners;

2,seeks better cleaners that reduce the frequency of cleaning;

3,rapid cleaning effect;

4,manufacturers prefer to use acidic formulations;

5,does not damage the cleaned surface and inhibits corrosion;

SolvayFentacare 002 97has excellent thickening effect in strong acid system, and has the functions of auxiliary cleaning, foaming and corrosion inhibition. It is widely used in household cleaning and industrial cleaning, such as toilet cleaner and rust remover. It is simple to use, and good thickening effect can be obtained by adding it at room temperature.

About acidic cleaning agent, the above is the relevant content of Qinxiang new material finishing. If you need to know more about raw materials, formulas or more technical support, please call us for advice.~